Nanoyo Titanium Dioxide (TiO2) is applied by spraying on to all designated surfaces, or any other surface such as walls, ceilings, curtains, cupboard, cushion and almost every surface, even glasses which required full transparency. This is because the TiO2 comes in the form of very fine particles (2-3nm), thus it will form a transparent film on hard surfaces such as glasses and tiles. Once the nano film is formed, its scratch-proof hardness will reach 4H. Our car’s hardness is only 2H. However, on soft surfaces such as fabrics, nanoyo will panetrate into these fabrics to cover all the linens within it.

Upon the application of Nanoyo Titanium Dioxide (TiO2) coating onto surfaces, it will form a thin layer of film on hard surfaces, however o soft surfaces like fabrics or carpets, the product will be penetrated inside these surfaces. The product will be dried off almost instantaneously. It will take 10-40 days to form a scratch proof hardness of 4H on the hand surfaces. However, the layer of our photo-catalyst coating will start working immediately after it has been applied. Light must be in existence for the coating to work at it’s full capacity.

When contact with lights (normal fluorescent light or direct sunlight or even heat), it will trigger the photo-catalyst process of our product. When contacted with lights, the TiO2 will have a very strong decomposition power, decomposing anything that is organic in nature (micro-organisms) which comes into contact with or onto the treated area. Bacteria, viruses, funguses and many other airborne contaminants are organic in nature.

Several issues have to be avoided:
Do not wash the surface which has been treated by Nanoyo with any detergent. Within the period of 14 days.
Do not scratch the treated surface.
Do not polish the treated surface.

Just recently, nanoYo is combined its technology with a German application technology. Nanoyo is now using the electrostatic sprayer system from Germany to apply its tio2. This made nanoyo the first and only and only tio2 applicator using such an advanced technology. With the electroctatic sprayer we achieve:
1. more than 90% coverage during applications
2. less wastages
3. Finer mists
4. better bonding streangths between nanoyo and the applied surfaces
5. faster application time as compared to normal spray paint gun.